TMillesich

TMillesich

Member Since 5 years ago

Experience Points
0
follower
Lessons Completed
26
follow
Lessons Completed
254
stars
Best Reply Awards
2
repos

5 contributions in the last year

Pinned
⚡ Simple example python/js solution to monitor CO2 concentration using MH-Z14 sensor connected with UART.
Activity
Dec
6
1 day ago
started
started time in 7 hours ago
Nov
29
1 week ago
started
started time in 1 week ago
Nov
25
1 week ago
started
started time in 1 week ago
started
started time in 1 week ago
Nov
16
3 weeks ago
Activity icon
issue

TMillesich issue comment geerlingguy/raspberry-pi-pcie-devices

TMillesich
TMillesich

Waveshare Mini Base Board

There is a new miniature Base Board from Waveshare available: https://www.waveshare.com/cm4-io-base-b.htm

Very nice compact style.

I ordered mine at aliexpress ( https://www.aliexpress.com/item/1005002397681702.html ) and will test the m.2 connector with a mikrotik ath9k wifi card via m.2->minipcie adapter + dual camera on it.

TMillesich
TMillesich

I would like to use the Waveshare mini base board in a 1U rack mount from myelectronics and power the PIs using PoE hats. Can someone confirm if the board is PoE hat compatible? Bonus point if you think it should fit into the rack? :D

The Waveshare mini base board is missing the 4 pin PoE header, which is mandatory for any PoE hat.

Nov
10
3 weeks ago
started
started time in 3 weeks ago
started
started time in 3 weeks ago
Oct
28
1 month ago
Oct
11
1 month ago
Oct
5
2 months ago
Activity icon
issue

TMillesich issue comment Xinyuan-LilyGO/LilyGo-T-OI-PLUS

TMillesich
TMillesich

wifi: no connectivity as STA and softAP

Hi,

I'm trying to compile and run examples/wifi/getting_started/ code having CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER=14. It seems the module is not able to connect to wifi nor become visible as softAP. Tested on v4.4-dev branch and current "master" (83956ebbae5b3)

TMillesich
TMillesich

Lilygo customer support replies with: "Hello, could you send us a screenshot of the serial printing about the error?"

I'm a bit out of ideas what exactly they want.

Sep
30
2 months ago
started
started time in 2 months ago
Sep
26
2 months ago
Sep
23
2 months ago
started
started time in 2 months ago
Sep
19
2 months ago
started
started time in 2 months ago
started
started time in 2 months ago
Sep
18
2 months ago
Activity icon
issue

TMillesich issue comment luizribeiro/mariner

TMillesich
TMillesich

Something went wrong The server replied with a 500 HTTP status code.

Hi there,

I'm quite new to mariner so pleas be gentle to me 😊 I'm using the software on a Pi Zero W and a Mars Pro.

Mariner worked some prints (may 5 to 6) but the I got prints which seemed to be aborted at about half of the print time. However Mariner and the Mars seemed to be done with the print in the morning. I tried the exact Chitufile directly from an USB-Stick and the print worked.

So I left Mariner alone for some time and now every time I start a print I get the message mentioned in the title. When I'm not printing I can access mariner just fine and can upload files.

Is there anything I can try or provide to help someone help me trying to figure this one out?

And help or a pointer in the right direction would be much appreciated.

Thanks guys and keep up the great work.

sudo journalctl -ub mariner3d.service gives only: Failed to add match 'mariner3d.service': Invalid argument

sudo dmesg: `Linux raspberrypi 5.10.52+ #1440 Tue Jul 27 09:53:08 BST 2021 armv6l

The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Mon Aug 16 17:03:53 2021 from 192.168.1.26 [email protected]:~ $ sudo dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.52+ ([email protected]) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1440 Tue Jul 27 09:53:08 BST 2021 [ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache[ 0.000000] OF: fdt: Machine model: Raspberry Pi Zero W Rev 1.1 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Reserved memory: created CMA memory pool at 0x17c00000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool[ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000001bffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000001bffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001bffffff] [ 0.000000] On node 0 totalpages: 114688 [ 0.000000] Normal zone: 1008 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 114688 pages, LIFO batch:31 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 113680 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:21:86:21 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 console=tty1 root=PARTUUID=2fd3879f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait modules-load=dwc2 [ 0.000000] Kernel parameter elevator= does not have any effect anymore. Please use sysfs to set IO scheduler for individual devices. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 374400K/458752K available (8680K kernel code, 1324K rwdata, 2824K rodata, 424K init, 837K bss, 18816K reserved, 65536K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 30707 entries in 60 pages [ 0.000000] ftrace: allocated 60 pages with 4 groups [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] random: get_random_bytes called from start_kernel+0x324/0x560 with crng_init=0 [ 0.000024] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000095] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000181] bcm2835: system timer (irq = 27) [ 0.000853] Console: colour dummy device 80x30 [ 0.001518] printk: console [tty1] enabled [ 0.001614] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792) [ 0.060347] pid_max: default: 32768 minimum: 301 [ 0.060648] LSM: Security Framework initializing [ 0.060974] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.061043] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.063072] cgroup: Disabling memory control group subsystem [ 0.063506] CPU: Testing write buffer coherency: ok [ 0.065337] Setting up static identity map for 0x8200 - 0x8238 [ 0.066612] devtmpfs: initialized [ 0.079571] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5 [ 0.079956] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.080039] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.087894] pinctrl core: initialized pinctrl subsystem [ 0.089772] NET: Registered protocol family 16 [ 0.094501] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.100917] audit: initializing netlink subsys (disabled) [ 0.102414] thermal_sys: Registered thermal governor 'step_wise' [ 0.103401] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers. [ 0.103491] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.103774] Serial: AMBA PL011 UART driver [ 0.110651] audit: type=2000 audit(0.100:1): state=initialized audit_enabled=0 res=1 [ 0.127368] bcm2835-mbox 2000b880.mailbox: mailbox enabled [ 0.140768] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-07-21T16:23:06, variant start [ 0.150784] raspberrypi-firmware soc:firmware: Firmware hash is 6a796bb0062a6c75191c57cba1c13f9300076d02 [ 0.202058] Kprobes globally optimized [ 0.210622] bcm2835-dma 20007000.dma: DMA legacy API manager, dmachans=0x1 [ 0.213774] SCSI subsystem initialized [ 0.214276] usbcore: registered new interface driver usbfs [ 0.214421] usbcore: registered new interface driver hub [ 0.214552] usbcore: registered new device driver usb [ 0.217322] clocksource: Switched to clocksource timer [ 2.220544] VFS: Disk quotas dquot_6.6.0 [ 2.220724] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.221010] FS-Cache: Loaded [ 2.221391] CacheFiles: Loaded [ 2.239379] NET: Registered protocol family 2 [ 2.239737] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 2.241176] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 2.241330] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 2.241455] TCP bind hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 2.241582] TCP: Hash tables configured (established 4096 bind 4096) [ 2.241788] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 2.241867] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 2.242340] NET: Registered protocol family 1 [ 2.243603] RPC: Registered named UNIX socket transport module. [ 2.243672] RPC: Registered udp transport module. [ 2.243709] RPC: Registered tcp transport module. [ 2.243743] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.245258] hw perfevents: no irqs for PMU, sampling events not supported [ 2.245376] hw perfevents: enabled with armv6_1176 PMU driver, 3 counters available [ 2.250018] Initialise system trusted keyrings [ 2.250556] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 2.262766] zbud: loaded [ 2.265810] FS-Cache: Netfs 'nfs' registered for caching [ 2.267250] NFS: Registering the id_resolver key type [ 2.267442] Key type id_resolver registered [ 2.267487] Key type id_legacy registered [ 2.267771] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 2.267826] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 2.269735] Key type asymmetric registered [ 2.269811] Asymmetric key parser 'x509' registered [ 2.269929] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 2.269982] io scheduler mq-deadline registered [ 2.270020] io scheduler kyber registered [ 2.273247] bcm2708_fb soc:fb: FB found 1 display(s) [ 2.284835] Console: switching to colour frame buffer device 82x26 [ 2.292555] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 656x416 [ 2.300089] random: fast init done [ 2.306503] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled [ 2.310854] bcm2835-aux-uart 20215040.serial: there is not valid maps for state default[ 2.319357] bcm2835-rng 20104000.rng: hwrng registered [ 2.322938] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB) [ 2.330608] gpiomem-bcm2835 20200000.gpiomem: Initialised: Registers at 0x20200000 [ 2.358131] brd: module loaded [ 2.376495] loop: module loaded [ 2.382006] Loading iSCSI transport class v2.0-870. [ 2.387642] libphy: Fixed MDIO Bus: probed [ 2.391101] usbcore: registered new interface driver smsc95xx [ 2.394111] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 2.397489] dwc_otg: FIQ enabled [ 2.397510] dwc_otg: NAK holdoff enabled [ 2.397523] dwc_otg: FIQ split-transaction FSM enabled [ 2.397549] Module dwc_common_port init [ 2.398028] usbcore: registered new interface driver usb-storage [ 2.401632] mousedev: PS/2 mouse device common for all mice [ 2.406358] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 2.412567] sdhci: Secure Digital Host Controller Interface driver [ 2.415735] sdhci: Copyright(c) Pierre Ossman [ 2.419599] mmc-bcm2835 20300000.mmcnr: could not get clk, deferring probe [ 2.423810] sdhost-bcm2835 20202000.mmc: could not get clk, deferring probe [ 2.427424] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.431354] ledtrig-cpu: registered to indicate activity on CPUs [ 2.434989] hid: raw HID events driver (C) Jiri Kosina [ 2.438296] usbcore: registered new interface driver usbhid [ 2.441296] usbhid: USB HID core driver [ 2.451198] Initializing XFRM netlink socket [ 2.454416] NET: Registered protocol family 17 [ 2.457711] Key type dns_resolver registered [ 2.461390] registered taskstats version 1 [ 2.464173] Loading compiled-in X.509 certificates [ 2.483422] uart-pl011 20201000.serial: cts_event_workaround enabled [ 2.486423] 20201000.serial: ttyAMA0 at MMIO 0x20201000 (irq = 81, base_baud = 0) is a PL011 rev2 [ 2.495370] bcm2835-aux-uart 20215040.serial: there is not valid maps for state default[ 2.502438] 20215040.serial: ttyS0 at MMIO 0x20215040 (irq = 53, base_baud = 50000000) is a 16550 [ 2.510136] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 2.515832] mmc-bcm2835 20300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 2.519132] mmc-bcm2835 20300000.mmcnr: DMA channel allocated [ 2.552118] sdhost: log_buf @ptrval) (97d10000) [ 2.593178] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 2.598073] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 2.602786] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 2.605702] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ 2.612615] of_cfs_init [ 2.615709] of_cfs_init: OK [ 2.641288] Waiting for root device PARTUUID=2fd3879f-02... [ 2.644367] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.697963] mmc0: host does not support reading read-only switch, assuming write-enable[ 2.706729] mmc0: new high speed SDHC card at address d555 [ 2.711525] mmcblk0: mmc0:d555 SU08G 7.61 GiB [ 2.717977] mmcblk0: p1 p2 [ 2.739015] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 2.741959] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 2.782797] mmc1: new high speed SDIO card at address 0001 [ 4.041825] EXT4-fs (mmcblk0p2): recovery complete [ 4.217646] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.222841] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 4.234472] devtmpfs: mounted [ 4.244739] Freeing unused kernel memory: 424K [ 4.247680] Kernel memory protection not selected by kernel config. [ 4.250676] Run /sbin/init as init process [ 4.253580] with arguments: [ 4.253595] /sbin/init [ 4.253607] with environment: [ 4.253619] HOME=/ [ 4.253630] TERM=linux [ 4.253642] modules-load=dwc2 [ 4.982387] systemd[1]: System time before build time, advancing clock. [ 5.159233] NET: Registered protocol family 10 [ 5.164571] Segment Routing with IPv6 [ 5.271441] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 5.283735] systemd[1]: Detected architecture arm. [ 5.309847] systemd[1]: Set hostname to . [ 6.674946] systemd-fstab-generator[66]: Checking was requested for "/piusb.bin", but it is not a device. [ 7.723994] random: systemd: uninitialized urandom read (16 bytes read) [ 7.751431] random: systemd: uninitialized urandom read (16 bytes read) [ 7.756161] systemd[1]: Listening on Syslog Socket. [ 7.764455] random: systemd: uninitialized urandom read (16 bytes read) [ 7.769624] systemd[1]: Listening on Journal Socket. [ 7.790337] systemd[1]: Mounting Kernel Debug File System... [ 7.820248] systemd[1]: Starting Restore / save the current clock... [ 7.856161] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped. [ 7.890858] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 7.902754] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.874826] dwc2 20980000.usb: supply vusb_d not found, using dummy regulator [ 8.898411] dwc2 20980000.usb: supply vusb_a not found, using dummy regulator [ 9.127725] dwc2 20980000.usb: EPs: 8, dedicated fifos, 4080 entries in SPRAM [ 9.137997] dwc2 20980000.usb: DWC OTG Controller [ 9.141121] dwc2 20980000.usb: new USB bus registered, assigned bus number 1 [ 9.144216] dwc2 20980000.usb: irq 33, io mem 0x20980000 [ 9.191451] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 9.197782] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.201023] usb usb1: Product: DWC OTG Controller [ 9.204192] usb usb1: Manufacturer: Linux 5.10.52+ dwc2_hsotg [ 9.207514] usb usb1: SerialNumber: 20980000.usb [ 9.277862] hub 1-0:1.0: USB hub found [ 9.297462] hub 1-0:1.0: 1 port detected [ 11.368661] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 12.076286] systemd-journald[91]: Received request to flush runtime journal from PID 1 [ 12.489653] FAT-fs (loop0): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 14.385960] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 14.399409] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 14.399447] [vc_sm_connected_init]: start [ 14.421130] mc: Linux media interface: v0.10 [ 14.435463] [vc_sm_connected_init]: installed successfully [ 14.599273] videodev: Linux video capture interface: v2.00 [ 14.692518] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 14.697257] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 14.719302] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 14.733205] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [ 14.780339] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 14.825710] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [ 14.826571] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [ 14.848161] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [ 14.895597] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [ 14.895661] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 14.895703] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 14.895770] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 14.895802] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 14.908092] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [ 14.909287] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 14.909371] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 14.938354] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 14.938433] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 14.942856] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 14.945307] bcm2835_audio bcm2835_audio: there is not valid maps for state default [ 14.970522] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 14.970602] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 16.800038] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 17.202203] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 17.828279] brcmfmac: F1 signature read @0x18000000=0x1541a9a6 [ 17.877716] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1 [ 17.879852] usbcore: registered new interface driver brcmfmac [ 18.161168] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1 [ 18.161402] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1 [ 18.161548] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available [ 18.162878] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct 22 2019 01:59:28 version 7.45.98.94 (r723000 CY) FWID 01-3b33decd [ 24.195578] 8021q: 802.1Q VLAN Support v1.8 [ 25.800825] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled [ 26.090359] random: crng init done [ 26.090395] random: 7 urandom warning(s) missed due to ratelimiting [ 26.419370] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS [ 26.663269] uart-pl011 20201000.serial: no DMA platform data [ 27.987243] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 31.182262] Bluetooth: Core ver 2.22 [ 31.182449] NET: Registered protocol family 31 [ 31.182466] Bluetooth: HCI device and connection manager initialized [ 31.192002] Bluetooth: HCI socket layer initialized [ 31.192040] Bluetooth: L2CAP socket layer initialized [ 31.192106] Bluetooth: SCO socket layer initialized [ 31.219514] Bluetooth: HCI UART driver ver 2.3 [ 31.219544] Bluetooth: HCI UART protocol H4 registered [ 31.219690] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 31.219980] Bluetooth: HCI UART protocol Broadcom registered [ 32.572156] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 32.572181] Bluetooth: BNEP filters: protocol multicast [ 32.572214] Bluetooth: BNEP socket layer initialized [ 34.988967] Mass Storage Function, version: 2009/09/11 [ 34.989003] LUN: removable file: (no medium) [ 34.989195] LUN: read only file: /piusb.bin [ 34.989213] Number of LUNs=1 [ 34.991844] g_mass_storage gadget: Mass Storage Gadget, version: 2009/09/11 [ 34.991876] g_mass_storage gadget: userspace failed to provide iSerialNumber [ 34.991890] g_mass_storage gadget: g_mass_storage ready [ 34.991911] dwc2 20980000.usb: bound driver g_mass_storage [email protected]:~ $`

TMillesich
TMillesich

I can reproduce that HTTP 500 error.

Looks like mariner does not like it when you use an USB-stick instead of the internal storage area. I wanted to use mariner just to check the actual print status (actual layer/time left), this might not be possible.

sudo journalctl -n 200 -f Sep 19 00:09:00 3dpi mariner[316]: FileNotFoundError: [Errno 2] No such file or directory: '/mnt/usb_share/_elderreddragon-body-head-tail_1-tail_2.ctb' Sep 19 00:10:00 3dpi mariner[316]: ERROR:waitress:Exception while serving /api/print_status Sep 19 00:10:00 3dpi mariner[316]: Traceback (most recent call last): Sep 19 00:10:00 3dpi mariner[316]: File "/opt/venvs/mariner3d/lib/python3.7/site-packages/waitress/channel.py", line 397, in service Sep 19 00:10:00 3dpi mariner[316]: task.service() Sep 19 00:10:00 3dpi mariner[316]: File "/opt/venvs/mariner3d/lib/python3.7/site-packages/waitress/task.py", line 168, in service Sep 19 00:10:00 3dpi mariner[316]: self.execute() Sep 19 00:10:00 3dpi mariner[316]: File "/opt/venvs/mariner3d/lib/python3.7/site-packages/waitress/task.py", line 434, in execute Sep 19 00:10:00 3dpi mariner[316]: app_iter = self.channel.server.application(environ, start_response) Sep 19 00:10:00 3dpi mariner[316]: File "/opt/venvs/mariner3d/lib/python3.7/site-packages/flask/app.py", line 2464, in __call__ Sep 19 00:10:00 3dpi mariner[316]: return self.wsgi_app(environ, start_response) Sep 19 00:10:00 3dpi mariner[316]: File "/opt/venvs/mariner3d/lib/python3.7/site-packages/whitenoise/base.py", line 85, in __call__ Sep 19 00:10:00 3dpi mariner[316]: return self.application(environ, start_response) Sep 19 00:10:00 3dpi mariner[316]: File "/opt/venvs/mariner3d/lib/python3.7/site-packages/flask/app.py", line 2450, in wsgi_app Sep 19 00:10:00 3dpi mariner[316]: response = self.handle_exception(e) Sep 19 00:10:00 3dpi mariner[316]: File "/opt/venvs/mariner3d/lib/python3.7/site-packages/flask/app.py", line 1867, in handle_exception Sep 19 00:10:00 3dpi mariner[316]: reraise(exc_type, exc_value, tb) Sep 19 00:10:00 3dpi mariner[316]: File "/opt/venvs/mariner3d/lib/python3.7/site-packages/flask/_compat.py", line 39, in reraise Sep 19 00:10:00 3dpi mariner[316]: raise value Sep 19 00:10:00 3dpi mariner[316]: File "/opt/venvs/mariner3d/lib/python3.7/site-packages/flask/app.py", line 2447, in wsgi_app Sep 19 00:10:00 3dpi mariner[316]: response = self.full_dispatch_request() Sep 19 00:10:00 3dpi mariner[316]: File "/opt/venvs/mariner3d/lib/python3.7/site-packages/flask/app.py", line 1952, in full_dispatch_request Sep 19 00:10:00 3dpi mariner[316]: rv = self.handle_user_exception(e) Sep 19 00:10:00 3dpi mariner[316]: File "/opt/venvs/mariner3d/lib/python3.7/site-packages/flask/app.py", line 1821, in handle_user_exception Sep 19 00:10:00 3dpi mariner[316]: reraise(exc_type, exc_value, tb) Sep 19 00:10:00 3dpi mariner[316]: File "/opt/venvs/mariner3d/lib/python3.7/site-packages/flask/_compat.py", line 39, in reraise Sep 19 00:10:00 3dpi mariner[316]: raise value Sep 19 00:10:00 3dpi mariner[316]: File "/opt/venvs/mariner3d/lib/python3.7/site-packages/flask/app.py", line 1950, in full_dispatch_request Sep 19 00:10:00 3dpi mariner[316]: rv = self.dispatch_request() Sep 19 00:10:00 3dpi mariner[316]: File "/opt/venvs/mariner3d/lib/python3.7/site-packages/flask/app.py", line 1936, in dispatch_request Sep 19 00:10:00 3dpi mariner[316]: return self.view_functions[rule.endpoint](**req.view_args) Sep 19 00:10:00 3dpi mariner[316]: File "/opt/venvs/mariner3d/lib/python3.7/site-packages/mariner/server/api.py", line 54, in print_status Sep 19 00:10:00 3dpi mariner[316]: FILES_DIRECTORY / selected_file Sep 19 00:10:00 3dpi mariner[316]: File "/opt/venvs/mariner3d/lib/python3.7/site-packages/flask_caching/__init__.py", line 952, in decorated_function Sep 19 00:10:00 3dpi mariner[316]: rv = f(*args, **kwargs) Sep 19 00:10:00 3dpi mariner[316]: File "/opt/venvs/mariner3d/lib/python3.7/site-packages/mariner/server/utils.py", line 20, in read_cached_sliced_model_file Sep 19 00:10:00 3dpi mariner[316]: return file_format.read(FILES_DIRECTORY / filename) Sep 19 00:10:00 3dpi mariner[316]: File "/opt/venvs/mariner3d/lib/python3.7/site-packages/mariner/file_formats/ctb.py", line 131, in read Sep 19 00:10:00 3dpi mariner[316]: with open(str(path), "rb") as file: Sep 19 00:10:00 3dpi mariner[316]: FileNotFoundError: [Errno 2] No such file or directory: '/mnt/usb_share/_elderreddragon-body-head-tail_1-tail_2.ctb'

Sep
17
2 months ago
Sep
16
2 months ago
Activity icon
issue

TMillesich issue geerlingguy/raspberry-pi-pcie-devices

TMillesich
TMillesich

Wrong header for the "Renesas uPD720201 USB 3.0 controller".

The Renesas has the header "MZHOU USB 3.0 adapter with M.2 SATA SSD slot" listed, but the Renesas has no M.2 SATA functionality.

Compare the header https://pipci.jeffgeerling.com/cards_usb/mzhou-usb3-sata-iii.html with https://pipci.jeffgeerling.com/cards_usb/renesas-UPD720201-usb3-6amlifestyle.html

Sep
14
2 months ago
started
started time in 2 months ago
Sep
13
2 months ago
started
started time in 2 months ago
Sep
9
2 months ago
started
started time in 2 months ago
Sep
7
3 months ago
started
started time in 2 months ago